System - AMD-GROUP

We have developped a wide range of matrix swtich till 24 inputs and 24 out puts.

Over the years, the microwaves research & development of AMD-GROUP has become a privileged
partner of french and european industries offices.
In addition, our experience and the flexibilty of our team makes us reactive and considerably reduces 
our completion times.

Blocking Matrix                              
The below schematic shows an example of a 3 X 3 non-blocking matrix. It is built with power dividers on the inputs and switches on the outputs.  
Each input signal is split to all output switches. This configuration  provides greater switching flexibility because you can have 
multiple output ports connected to the same input port at the same time.

Non-Blocking Matrix       
The below schematic shows an example of a 3 X 3 blocking matrix. It is built with switches on both the input ports and output ports. 
Each  output port can only be connected to a single input port. Also, each  input port can only be connected to a single output port. 
This configuration maximizes the isolation between ports and minimizes the insertion loss of the system.

Handover test system

The below schematic shows an example of a standard 4 X  2 handover test system.  Every possible path from Antenna to Terminal  has its own programmable attenuator. 

With this configuration the  simulation of signal fading can be achieved. With Ethernet and USB  control, we can provide you with the remote commands 

to simplify your  test setup such as Handover, Variable Handover, Fade Attenuator, and  Pause.

Transceiver test system
The below schematic shows an example of a standard 3  port transceiver test system. Every possible path from port to port has  its own programmable attenuator, 
so you can simulate changing distance  in a network. With this configuration you can vary the attenuation  between radios. 
With Ethernet and USB control, we can provide you with  the remote commands to simplify your test setup such as Handover,  Variable Handover, Fade Attenuator, and Pause.

Buildup yourself

The SYS14002 and SYS14002-1 modular chassis are capable of hosting respectively 6 and 12 module of 3U 7F.
Those units hold inside a control module to connect the system to a computer by USB or Ethernet protocol.